Skip to content

A stranded wire under a screw terminal wants a ferrule

The best ferrule crimping tools for 2026

A ferrule is the metal sleeve crimped onto a stranded conductor before it goes under a screw terminal, and it exists because a screw tightened onto loose strands cuts some of them and loosens over time. The tool that fits it is defined by its crimp profile: square, trapezoidal or hexagonal, each leaving a different shape and each suiting particular terminals — square is the common choice for DIN rail work, hexagonal for larger cross-sections. The cross-section range in square millimetres decides what the jaws will accept, and most installations on this site want a tool spanning the small control wiring and the mid-range power cables, which is often two tools rather than one. A ratchet guarantees a complete crimp; adjustment keeps it honest over the years. Self-adjusting tools size the crimp automatically and suit mixed work, at the cost of a slightly larger head. Many listings are kits with an assortment of ferrules, and the value depends entirely on whether the sizes supplied match the cable actually used. We compare crimp profile, cross-section range, ratchet and adjustment, self-adjusting mechanisms, kit contents and build quality.

Every part on this shelf, side by side

  1. Miiepls ferrule crimping tool with a sorting box of ferrules

    Miiepls Self-adjusting square crimper with 1250 ferrules, 0.25–10 mm²

    A self-adjusting ferrule crimping tool producing a four-sided crimp from 0.25 to 10 mm², supplied with 1250 ferrules in a sorting box.

    Crimp profile
    Four-sided square, with even pressure from all four sides, first bullet
    Cross-section range
    0.25 to 10 mm², second bullet, for insulated and uninsulated ferrules
    Ratchet
    Nowhere in the listing
    Adjustment
    Self-adjusting — the press sets itself to the ferrule, second bullet
    Self-adjusting mechanisms
    The clamping arrangement adapts automatically to the insulating sleeve, third bullet
    Kit contents
    1250 ferrules in the commonest sizes, in a sorting box, first bullet
    Build quality
    Described as having an ergonomic grip; the steel is not named
    Amazon reference
    B0BXL6Q455 (same reference on 5 Amazon marketplaces)
    EAN
    0078656228178
    • Self-adjusting, so the size does not have to be selected before each crimp
    • 1250 ferrules in a sorting box, which is the part that keeps a van fit-out moving
    • No ratchet stated, so there is nothing preventing an incomplete crimp

    Best for: A first ferrule set for control wiring in a van or a workshop.

    ≈ €10
    Check price on Amazon
  2. Aoktionyxus ratcheting ferrule crimper with sorted ferrule case

    Aoktionyxus Ratcheting self-adjusting crimper with 1250 ferrules, alloy steel

    A ratcheting, self-adjusting ferrule crimper in high-strength alloy steel with four mandrels, supplied with 1250 insulated ferrules in a sorted case.

    Crimp profile
    Four mandrels giving even pressure from all sides, third bullet
    Cross-section range
    0.25 to 10 mm² on the tool; the supplied ferrules cover 0.5 to 10 mm², second bullet
    Ratchet
    A ratchet system with an automatic clamp and stop arrangement, first bullet
    Adjustment
    Dynamically self-adjusting to the crimp diameter, first bullet
    Self-adjusting mechanisms
    Automatic clamping and stopping, first bullet
    Kit contents
    1250 insulated ferrules in the commonest sizes, sorted in a sturdy case, second bullet
    Build quality
    High-strength alloy steel, third bullet
    Amazon reference
    B0H1BWV2YT (same reference on 5 Amazon marketplaces)
    EAN
    0717363621970
    • A ratchet AND self-adjustment, which few tools at this price combine
    • The steel is named — high-strength alloy
    • The tool covers 0.25 mm² and the supplied ferrules start at 0.5 mm²

    Best for: Ferrule work where the crimp should be repeatable without thinking about it.

    ≈ €13
    Check price on Amazon
  3. kelav ratcheting ferrule crimper with 1800 ferrules

    kelav Ratcheting carbon steel crimper with 1800 ferrules, four-stage crimp

    A ratcheting ferrule crimper with a carbon steel body and heat-treated iron-nickel alloy jaws, self-regulating across 0.25 to 10 mm², with 1800 ferrules.

    Crimp profile
    Four-stage crimping described in the second bullet
    Cross-section range
    0.25 to 10 mm², from the title
    Ratchet
    A ratchet mechanism with self-regulating pressure, second bullet
    Adjustment
    Self-regulating pressure rather than manual selection, second bullet
    Self-adjusting mechanisms
    Automatic pressure adjustment across the range, second bullet
    Kit contents
    1800 ferrules, from the title — the second largest count in this family
    Build quality
    Carbon steel body with high wear and stamping resistance; jaws in iron-nickel alloy with a black oxide coating and heat treatment, first and third bullets
    Amazon reference
    B0FNMXRYMH (same reference on 6 Amazon marketplaces)
    EAN
    0606762050460
    • The jaw material is described in detail — iron-nickel alloy, black oxide coated, heat treated
    • A ratchet with self-regulating pressure
    • The crimp profile is described as four-stage rather than named as square or hexagonal

    Best for: Repeated ferrule work where the jaws will see thousands of crimps.

    ≈ €13
    Check price on Amazon
  4. Preciva self-adjusting ferrule crimper with ferrule assortment

    Preciva Self-adjusting square crimper with 1200 ferrules, 0.25–10 mm²

    A self-adjusting ferrule crimper producing an even four-sided crimp from 0.25 to 10 mm², with a short-span non-slip grip and 1200 ferrules.

    Crimp profile
    Even four-sided square press, first bullet
    Cross-section range
    0.25 to 10 mm², second bullet
    Ratchet
    Nowhere in the listing
    Adjustment
    Self-adjusting — the press sets itself to the ferrule, second bullet
    Self-adjusting mechanisms
    Automatic adjustment across the range, second bullet
    Kit contents
    1200 ferrules, from the title
    Build quality
    Non-slip coated grip with a short span requiring less hand opening, third bullet
    Amazon reference
    B073TZ5BBG (same reference on 6 Amazon marketplaces)
    EAN
    0602191688663
    • The short grip span is named specifically, which matters for smaller hands and confined spaces
    • An even four-sided press, described with the reason it holds better
    • No ratchet stated

    Best for: Working inside a consumer unit or a cramped locker where the tool cannot open fully.

    ≈ $24 / £23 / €18
    Check price on Amazon
  5. Bayertal ferrule crimper with force adjustment wheel and 2000 ferrules

    BAYERTAL Square crimper with 2000 ferrules and a force adjustment wheel

    A ferrule crimper with an adjustment wheel for setting crimping force by conductor size and ferrule type, covering 0.25 to 10 mm², with 2000 ferrules.

    Crimp profile
    Precise square press giving an even, firm connection, first bullet
    Cross-section range
    0.25 to 10 mm², given also as AWG 23 to 7, second bullet
    Ratchet
    Nowhere in the listing
    Adjustment
    An adjustment wheel for crimping force, third bullet — the only tool in this family with one
    Self-adjusting mechanisms
    Not self-adjusting; the force is set by hand on the wheel for the conductor size and ferrule type
    Kit contents
    2000 ferrules, from the title — the largest count in this family
    Build quality
    Described as giving clean and reproducible crimps; the steel is not named
    Amazon reference
    B0CQ5JKXCF (same reference on 5 Amazon marketplaces)
    EAN
    4260679360904
    • A force adjustment wheel, which lets the crimp be tuned to the ferrule type rather than assumed
    • 2000 ferrules, the largest count here
    • Manual adjustment rather than self-adjusting, so the wheel has to be set correctly

    Best for: Someone crimping several ferrule types who wants control over the result.

    ≈ €23
    Check price on Amazon
  6. BAURIX self-adjusting ferrule crimper with 1800 ferrules

    BAURIX Self-adjusting square crimper with 1800 ferrules, insulated and uninsulated

    A self-adjusting ferrule crimper for both insulated and uninsulated ferrules from 0.25 to 10 mm², producing an even square crimp, with 1800 ferrules supplied.

    Crimp profile
    Even square press with pressure from four sides, third bullet
    Cross-section range
    0.25 to 10 mm², second bullet
    Ratchet
    Nowhere in the listing
    Adjustment
    Self-adjusting — the press sets itself to the ferrule, second bullet
    Self-adjusting mechanisms
    Automatic, across the range
    Kit contents
    1800 ferrules, from the title
    Build quality
    Described as giving an even square press; the steel is not named
    Amazon reference
    DE B07R6T4H7W · US B07R6T4H7W · GB B08BCNPXDJ · FR B08BCNPXDJ · IT B07R6T4H7W · ES B07R6T4H7W
    EAN
    8719327097304
    • Insulated and uninsulated ferrules both handled, stated explicitly
    • 1800 ferrules supplied
    • No ratchet stated

    Best for: Mixed work where both insulated and uninsulated ferrules turn up.

    ≈ €30
    Check price on Amazon
  7. SOMELINE hexagonal ratcheting ferrule crimper with ferrule assortment

    SOMELINE HEXAGONAL ratcheting crimper with 1505 ferrules in 28 sizes

    A ratcheting ferrule crimper with a hexagonal crimp profile covering 0.25 to 10 mm², supplied with 1505 insulated ferrules across 28 sizes.

    Crimp profile
    Hexagonal, from the title — the only tool in this family with a hexagonal profile rather than a square one
    Cross-section range
    0.25 to 10 mm², first bullet
    Ratchet
    An efficient ratchet mechanism, first bullet
    Adjustment
    An adjustment is named in the first bullet alongside the ratchet
    Self-adjusting mechanisms
    Described as self-adjusting, from the title
    Kit contents
    1505 insulated ferrules in 28 sizes, second bullet — the only listing to state how many sizes
    Build quality
    Professional crimping jaws, first bullet; the steel is not named
    Amazon reference
    B07G6ZBMCT (same reference on 6 Amazon marketplaces)
    EAN
    0723247580875
    • A hexagonal profile, which suits larger cross-sections and is the only one here
    • A ratchet, and the size count in the box is published — 28 sizes
    • Hexagonal is not the conventional profile for small ferrules in a spring terminal

    Best for: Larger ferrules where a hexagonal crimp suits the terminal better than a square one.

    ≈ £33 / €33
    Check price on Amazon

A price quoted in the text of a PowerVerdict page dates from the day that page was written; the live figure beside each product is fetched while you read and replaces it.